Arduino . 1

Práctica 1: LED que parpadea

• Monta un LED sobre el pin 13 y protégelo con una R de 300 Ω
• Abre Arduino Ejemplos/01 Basics/Blink.
• Descarga el programa sobre la placa Arduino.
  

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 13 as an output.
  pinMode(13, OUTPUT);
}
 
// the loop function runs over and over again forever
void loop() {
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);              // wait for a second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);              // wait for a second
}